|
|
|
|
|
|
|
Cleaning
Recommendations – Machined Graphite Parts |
Clean
Ultrasonically
clean in de-ionized (DI) water for 15 minutes per treatment.
Prolonged exposure to ultrasonic energy may produce “pitting”
in graphite materials. If water volume is small, use
three 5-minute cleaning steps with fresh DI water each
time. |
Surface Oil Removal
If oil/grease/fingerprints are a concern, ultrasonically
clean parts in methanol for 15 minutes. Do not dry
parts. Immediately immerse parts in DI water and
ultrasonically clean for a minimum of 5 minutes and
a maximum of 15 minutes. |
Dry/Bake
Dry
thoroughly - bake in vacuum (preferred) or inert atmosphere
furnace for 1 to 2 hours at a minimum of 120°C, preferably
at 260°C. Avoid exposure to air, oxygen, or moisture
at temperatures above 350°C (oxidation may occur). |
|
|
|
CAUTION: |
Use of chlorinated solvents (example: TCE) may result
in contamination of your system, since these solvents
are difficult to remove. |
|
|
|
|
Additional Information | | Entegris Entegris welcomes POCO to the family. | | How to Buy POCO products are available through a variety of outlets. | | Quality Poco Graphite is committed to providing the highest quality graphite materials to its customers. | | Literature Download information about specific POCO products or Material Safety Data Sheets (MSDS). | | Contacts Get address, phone, fax and email information for POCO and its Distributors. | | Careers Note that you will be redirected to our parent company website, entegris.com, to search available positions. | | Training EDM Training Classes Free to the Industry |
|
|
|
|
|
|
|
|